euroquartz limited blacknell lane crewkerne somerset uk ta18 7he tel: +44 (0)1460 230000 fax: +44 (0)1460 230001 info@euroquartz.co.uk www.euroquartz.co.uk euro quartz 7 x 5mm high frequency hcmos oscillator XOV576 are 6 pad smd oscillators designed to provide a high quality hcmos output at frequencies from 125mhz to 200mhz. phase and rms period jitter are kept within low limits. an enable/disable function is standard and the oscillator may also be specified with a power down function. industry-standard 6 pad 7.0 x 5.0mm package frequency range 125mhz to 200mhz high frequency range at low cost supply voltage 2.5v or 3.3volts tristate function to conserve power features outline & dimensions frequency range: 125.0mhz to 200.0mhz output logic: hcmos phase jitter: 3.5ps typical rms period jitter: 4.0ps typical frequency stability commercial: 25ppm to 100ppm -10 to +70c industrial: 25ppm to 100ppm -40 to +85c input voltage: +2.5v to +3.3vdc 10% output voltage high '1': +2.97v minimum low '0': +0.33 v maximum rise/fall time: 0.25ns typical, 0.5ns max. (20%vdd to 80%vdd) current consumption: 80ma typical (frequency dependent) load: 15pf start-up time: 5ms typical, 10ms maximum duty cycle: 50% 5% (measured at vdd-1.3v) input static discharge protection: 2kv maximum ageing: 2pmm per year maximum specification part number schedule nominal frequency (mhz) series designation XOV576 temperature stability: 025 = 25ppm 050 = 50ppm 100 = 100ppm output hcmos operating temperature range c = -10 to +70c i = -40 to +85c tristate (enable/disable) function supply voltage 3 = 3.3 volts 25 = 2.5 volts solder temperature profile tristate options XOV576 oscillators description permanent damage may occur if units are operated beyond specified limits. supply voltage: +4.6 vdc max. input voltage vi: vss-0.5 min., vdd +0.5v max. input voltage vo: vss-0.5 min., vdd +0.5v max. absolute maximum ratings 125mhz to 200mhz disable output is disabled when pad 1 is taken below 0.3 vcc referenced to ground oscillator continues to run while disabled. enable oscillator is enabled when pad 1 is taken above 0.7 vcc referenced to ground. power down available by special request: oscillator shuts down when disabled. longer time to enable. example: 150.0mhz XOV576050ucta 150.0mhz XOV576050ucta
|
